Micro-Mesh® In Stripes, Various Grit

Sold in strips 1/2 meter long and 15.3cm wide

The finest quality smoothing and polishing material

Micro-Mesh is excellent for intermediate sanding between coats of paint, retouching and fine finishing work on wood, plastic, plexiglass, and metal surfaces, including polishing, on irregular and curved surfaces in particular. The abrasive particles are suspended in a silicon matrix firmly bound to a thin, highly flexible textile basis, so that no residues remain on the finished surface. MM can be used dry, with water, or with petroleum, and is very long-lasting under normal wear.

Grit Conversion
Use the CONVERSION CHART as a guide to know when you can start using MICRO- MESH™. Use conventional abrasives as normal prior to going into the MICRO-MESH™ stage. It is advantageous to use MICRO-MESH™ as soon as possible in your finishing process as it gives a more consistent scratch pattern and therefore a better surface finish.

Achieving the best finish PDF helps you to achieve the best finish using MICRO-MESH®.